Mohd Al Haj Kambar Awazi L.L.C.
Call: +971 4 2222464

Products

JABSCO

The world's premier and largest producer of marine craft toilets, pumps, water systems and control fluids.

jabsco logo

10550-200

3/4 '' bronze pump, 40-size, foot-mounted with BSP threaded ports
  • Connections: 3/4'' BSP Ports
  • Output: Nominal 40l/min @ 1500rpm
  • Packaged Dimensions: L:24.00 x H:12.00 x W:13.00cm
  • Actual Weight: 2.33 Kg  (Approx. 2.83 Kg packed)

10770-0451

11/2'' bronze pump, 200-size, flange-mounted with flanged ports
  • Packaged Dimensions: L:22.00 x H:34.00 x W:21.00cm
  • Actual Weight: 7.17 Kg  (Approx. 8.17 Kg packed)

10950-2401

3/4 '' bronze pump, 40-size, flange-mounted with BSP threaded ports
Standard on Ford 4-cylinder 'Dover' & 'Dorset' diesel engines
  • Connections: 3/4'' BSP Ports
  • Packaged Dimensions: L:26.00 x H:16.00 x W:21.00cm
  • Actual Weight: 3.04 Kg  (Approx. 3.54 Kg packed)

31295-0092

Par Max 1.9' pressure-controlled pump (12 volt d.c.)
  • Connections: for 13mm (½") bore hose or Hep20 push-fit connectors CW193
  • Dimensions: 230mm long, 152mm wide, 110mm high
  • Fuse Size: 10 amp
  • Maximum Current: 3.5(amps)
  • Output: 7 litres/minute (1.5 gallons/minute) open flow
  • PRESSURE SWITCH - cuts in at 1.0bar (15psi) - cuts out at 1.7bar (25psi)
  • Efficient, high-flow, self-priming pump serving 2 or more outlets
  • Multi-diaphragm design self primes to 1.8m vertical lift, can run dry without damage
  • Supplied with snap-in ports for hose or Hep20 connectors
  • Quiet running
  • Motor protected by automatic thermal overload cut-out
  • Includes bypass feature to provide smooth, quiet flow. No need for accumulator tank
  • Packaged Dimensions: L:17.00 x H:11.00 x W:34.00cm
  • Actual Weight: 1.60 Kg  (Approx. 2.10 Kg packed)

31620-0092

Par Max 4' pressure-controlled pump (12 volt d.c., High Pressure)
  • Connections: for 13mm (½") bore hose or Hep20 push-fit connectors CW193
  • Dimensions: 250mm long, 105mm wide, 100mm high
  • Fuse Size: 15 amp
  • Output: 16 litres/minute (3.5 gallons/minute) open flow
  • PRESSURE SWITCH - cuts in at 1.4bar (20psi) - cuts out at 2.8bar (40psi)
  • Efficient, high-flow, self-priming pump serving 4 or more outlets
  • Multi-diaphragm design self primes to 1.5m vertical lift, can run dry without damage
  • Supplied with snap-in ports for hose or Hep20 connectors
  • Motor protected by automatic thermal overload cut-out
  • Packaged Dimensions: L:17.00 x H:11.00 x W:34.00cm
  • Actual Weight: 2.98 Kg  (Approx. 3.48 Kg packed)

32600-0092

Par Max 3.5' pressure-controlled pump (12 volt d.c.)
  • Connections: for 13mm (½") bore hose or Hep20 push-fit connectors CW193
  • Dimensions: 220mm long, 105mm wide, 113mm high
  • Fuse Size: 15 amp
  • Output: 13 litres/minute (2.9 gallons/minute) open flow
  • Weight: 2.5(kgs)
  • PRESSURE SWITCH - cuts in at 1.4bar (20psi) - cuts out at 2.8bar (40psi)
  • Efficient, high-flow, self-priming pump serving 4 or more outlets
  • Multi-diaphragm design self primes to 1.5m vertical lift, can run dry without damage
  • Supplied with snap-in ports for hose or Hep20 connectors
  • Motor protected by automatic thermal overload cut-out
  • Packaged Dimensions: L:17.00 x H:11.00 x W:34.00cm
  • Actual Weight: 2.47 Kg  (Approx. 2.97 Kg packed)

18220-1127

Wakeboard and Ski Boat Ballast pump 12 volt d.c.
Connections for 25mm (1") bore hose or use 1/2" hose adapters
  • Connections: - for 25mm (1") bore hose or ½" BSP
  • Dimensions: - 181mm long, 121mm wide, 92mm high
  • Maximum Current: - 11.5(amps)
  • Output: - up to 40 litres/minute (9 gallons/minute)
  • Fills a typical 180 litre ballast tank in under 5 minutes
  • Reversible to both fill and empty tanks
  • Self-priming and non air-locking
  • Bronze body, stainless steel shaft
  • Packaged Dimensions: L:22.00 x H:9.00 x W:13.00cm
  • Actual Weight: 3.22 Kg  (Approx. 3.72 Kg packed)

23920-2213

'Utility Puppy 3000' self-priming pump 12 volt d.c.
3/4" BSP threaded ports
  • Connections: - ¾" BSP inlet and discharge ports.
  • Dimensions: - length 220mm, width 125mm, height 105mm
  • Fuse Size: - 25 amp
  • Maximum Current: - 21(amps)
  • Output: - up to 50 litres/minute (11 gallons/minute). Max 12m head
  • Built-in dry-running protection for up to 10 minutes after initial prime
  • Rapid self-priming from dry up to 2.4m
  • Carbon-ceramic shaft seal
  • Non-rusting bronze body
  • Continuously rated electric motor
  • Simple, fully serviceable design with few wearing parts
  • Packaged Dimensions: L:29.00 x H:14.00 x W:16.00cm
  • Actual Weight: 4.65 Kg  (Approx. 5.15 Kg packed)

32305-0392

Par-max 3' Pressure-controlled self-priming washdown diaphragm pump
12 volt d.c., supplied with inlet strainer, port fittings & trigger nozzle
  • Connections: - for 13 mm (1/2") bore hose and for 19 mm (3/4") bore hose
  • Dimensions: - 220mm long, 105mm wide, 113mm high
  • Fuse Size: - 12 amp
  • Max Pressure: - 4.1bar (60psi)
  • Output: - 11 litres/minute (2.9 gallons/minute)
  • Weight: - 2.1(kgs)
  • Compact 3 chamber pump
  • Diaphragm design allows for dry running
  • Jabsco 'Pump Guard' strainer, port fittings and trigger nozzle included
  • Corrosion resistant. Suitable for use with salt water
  • Sealed Motor
  • Self-priming up to 3m vertical lift
  • Packaged Dimensions: L:23.00 x H:12.00 x W:11.00cm
  • Actual Weight: 1.60 Kg  (Approx. 2.10 Kg packed)

31610-0092

Self-priming diaphragm pump 12 volt d.c.
Connections for 19mm (3/4") bore hose
  • Connections: - for 19mm (3/4") bore hose
  • Dimensions: - 196mm long, 106mm wide, 100mm high
  • Fuse Size: - 10 amp
  • Output: - up to 13 litres/minute (2.9 gallons/minute) at 1m (3ft) head.
  • For bilge pumping or shower drain
  • Continuously rated motor with thermal overload protection
  • Multiple diaphragm design allows extended dry running
  • Self-primes up to 2.5m vertical lift
  • Jabsco 'Pump Guard' strainer included with pump
  • Packaged Dimensions: L:17.00 x H:11.00 x W:34.00cm
  • Actual Weight: 2.53 Kg  (Approx. 3.03 Kg packed)

31705-0092

Self-priming diaphragm pump 12 volt d.c.
Connections for 19mm (3/4") bore hose
  • Connections: - for 19mm (3/4") bore hose
  • Dimensions: - 248mm long, 106mm wide, 100mm high
  • Fuse Size: - 15 amp
  • Output: - up to 16 litres/minute (3.5 gallons/minute). Maximum recommended total head 4m
  • For bilge pumping, shower drain or livewell circulation
  • Continuously rated motor with thermal overload protection
  • Multiple diaphragm design allows extended dry running
  • Self-primes up to 2.5m vertical lift
  • Jabsco 'Pump Guard' strainer included with pump
  • Packaged Dimensions: L:17.00 x H:11.00 x W:34.00cm
  • Actual Weight: 3.00 Kg  (Approx. 3.50 Kg packed)

37202-2012

Self-priming diaphragm pump 12 volt d.c.
Connections for 19mm (3/4") bore hose
  • Connections: - for 19mm (3/4") bore hose.
  • Dimensions: - 130 mm long, 190mm wide, 150mm high
  • Fuse Size: - 10 amp
  • Output: - up to 13 litres/minute (2.8 gallons/minute). Maximum recommended total head 3m
  • Updated version of the popular PAR 37202
  • Quiet running with shielded drive
  • Single diaphragm design allows extended dry running
  • Jabsco 'Pump Guard' strainer included with pump
  • Self-primes up to 2m vertical lift
  • Packaged Dimensions: L:20.00 x H:17.00 x W:15.00cm
  • Actual Weight: 2.08 Kg  (Approx. 2.58 Kg packed)

53020-2013

Utility 20' 3/4" self-priming pump
230volt/1 phase/50Hz a.c. (for d.c versions see 'Utility Puppy' in Bilge or Shower Drain sections)
  • Connections: - ¾" BSP inlet and discharge ports.
  • Dimensions: - length 275mm, width 170mm, height 171mm
  • Output: - up to 18 litres/minute (4 gallons/minute).Max 15m head
  • Built-in dry-running protection for up to 10 minutes after initial prime
  • Rapid self-priming from dry up to 2m
  • Will handle hard or soft solids
  • Corrosion resistant bronze body, stainless steel shaft
  • Carbon-ceramic mechanical shaft seal
  • Simple, fully serviceable design with few wearing parts
  • Packaged Dimensions: L:39.00 x H:27.00 x W:29.00cm
  • Actual Weight: 8.40 Kg  (Approx. 9.40 Kg packed)

53040-2003

Utility 40' 1" self-priming pump
230volt/1 phase/50Hz IP54 Electric Motor, Nitrile oil-resistant impeller. Std Duty
  • Connections: – 1" BSP internal threaded ports
  • Dimensions: - 300mm long, 210mm wide, 240mm high
  • Output: – up to 35 litres/minute
  • Built-in dry-running protection for up to 30 minutes after initial prime
  • Rapid self-priming from dry up to 4m
  • Will handle hard or soft solids
  • Corrosion resistant bronze body, stainless steel shaft
  • Carbon-ceramic mechanical shaft seal
  • Simple, fully serviceable design with few wearing parts
  • Packaged Dimensions: L:39.00 x H:27.00 x W:29.00cm
  • Actual Weight: 12.83 Kg  (Approx. 13.83 Kg packed)

53041-2003-110

Utility 40' 1" self-priming pump
110volt/1 phase/50Hz IP54 Electric Motor, Nitrile oil-resistant impeller. Heavy Duty
  • Connections: – 1" BSP internal threaded ports
  • Dimensions: - 300mm long, 210mm wide, 240mm high
  • Output: – up to 35 litres/minute
  • Built-in dry-running protection for up to 30 minutes after initial prime
  • Rapid self-priming from dry up to 4m
  • Will handle hard or soft solids
  • Corrosion resistant bronze body, stainless steel shaft
  • Carbon-ceramic mechanical shaft seal
  • Simple, fully serviceable design with few wearing parts
  • Continuously rated motor
  • Actual Weight: 11.57 Kg  (Approx. 12.57 Kg packed)

17860-2012

Flat Tank Oil Changer 12V (12 volt d.c.)
  • Connections: - 13mm (½") to fit pipes supplied with pump
  • Fuse Size: 5 amp
  • Maximum Current: 2(amps)
  • Output: - up to 1.8 litres/minute (0.4gallons/minute).
  • Self-contained engine oil change kit, ready to use
  • Empties oil sumps on engines up to 4 cylinders, including 4 stroke outboard engines.
  • 1.8m electric cable
  • 2.4m Convenient dipstick suction tube
  • Sealed 13 litre (2.9 gallon) container with easy pour spout
  • Includes battery clamps and on-off switch
  • Packaged Dimensions: L:50.00 x H:33.00 x W:21.00cm
  • Actual Weight: 3.20 Kg  (Approx. 3.70 Kg packed)

23220-2012

Junior Gear Puppy pump 12 volt d.c.
Connections for 12.7mm (1/2") bore hose
  • Connections: - for 12.7mm (½") bore hose
  • Dimensions: - 136mm long, 165mm wide, 80mm high
  • Fuse Size: - 10 amp
  • Maximum Current: - 7(amps)
  • Output: - up to 13.5 litres/minute (3 gallons/minute) at 5m head
  • Medium duty, continuously rated general purpose pump
  • Self-priming up to 1m vertical lift
  • Simple design with few wearing parts
  • Maximum liquid viscosity 50cS (diesel and light oils)
  • Inlet strainer included
  • Suitable for Diesel transfer, water or oil
  • Packaged Dimensions: L:22.00 x H:9.00 x W:13.00cm
  • Actual Weight: 1.67 Kg  (Approx. 2.17 Kg packed)

23590-2010

Hydraulic oil transfer pump, self-priming (12 volt d.c.)
  • Connections: – ½" BSP (parallel) threaded ports.
  • Dimensions: - 205mm long, 105mm wide, 130mm high
  • Fuse Size: - 20 amp
  • Output: - 26 litres/minute Maximum recommended differential pressure 1.5bar
  • Specially designed for hydraulic oil transfer
  • Dedicated pump will avoid the risk of hydraulic oil contamination
  • Self-primes to 1.8m when wetted
  • Sliding vane design for high efficiency
  • Use minimum 19mm (¾") bore hose
  • Aluminium body
  • Packaged Dimensions: L:24.00 x H:17.00 x W:21.00cm
  • Actual Weight: 2.72 Kg  (Approx. 3.22 Kg packed)

50840-2012

Centrifugal 'Cyclone' pump, non-self-priming (12 volt d.c.)
  • Connections: - ¾"BSP internal threaded ports
  • Dimensions: - 163mm long, 120mm wide, 122mm high
  • Fuse Size: - 10 amp
  • Maximum Current: - 7(amps)
  • Output: - 100 litres/minute (22 gallons/minute) @ 0.1m head
  • High output, continuous rated centrifugal pump
  • Robust stainless steel body
  • Can be used with shut-off nozzle
  • Non-self-priming, requires flooded suction
  • Maximum recommended total head 4m
  • Packaged Dimensions: L:24.00 x H:13.00 x W:18.00cm
  • Actual Weight: 2.98 Kg  (Approx. 3.48 Kg packed)

50860-2012

Centrifugal High Pressure 'Cyclone' pump, non-self-priming (12 volt d.c.)
  • Connections: - ¾"BSP internal threaded ports
  • Dimensions: - 205mm long, 120mm wide, 122mm high
  • Fuse Size: - 25 amp
  • Maximum Current: - 21(amps)
  • Output: - 80 litres/minute (18 gallons/minute) @ 0.1m head
  • High output, intermittent rated centrifugal pump
  • Robust stainless steel body
  • Can be used with shut-off nozzle
  • Non-self-priming, requires flooded suction
  • Maximum recommended total head 12m
  • Minimum recommended total head 5m
  • Packaged Dimensions: L:31.00 x H:14.00 x W:16.00cm
  • Actual Weight: 4.90 Kg  (Approx. 5.40 Kg packed)

59510-0012

12 volt d.c. plastic pump, non-self-priming, for hot water circulation
Brushless motor - up to 20,000 hour life.
  • Connections: - for 19mm (¾") bore hose
  • Dimensions: - 97mm long, 100mm wide, 70mm high
  • Fuse Size: 2 amp
  • Maximum Current: 1.2(amps)
  • Output: - up to 12.5 litres/minute at 1.2m total head
  • Compact, long life pump for hot water circulation
  • Circulates water up to 100ºC
  • Magnetic drive - no shaft seal to leak
  • Continuously rated
  • Supplied with mounting bracket
  • Actual Weight: 0.42 Kg  (Approx. 0.62 Kg packed)

50200-2011

1 1/2" bronze pump, 200-size, foot-mounted with BSP threaded ports
12 volt d.c. electric clutch with 2A pulley
  • Connections: -1½" BSP internal threaded ports.
  • Dimensions: - 200mm long, 180mm pulley diameter, 152mm across ports
  • Fuse Size: - 5 amp
  • Output: - at 1500 rpm 195 litres/minute (43 gallons/min) at 3m total head
  • Heavy duty bilge and deck wash pump
  • Bronze body, stainless steel shaft, mechanical shaft seal
  • Neoprene impeller fitted as standard for maximum performance with clean or lightly contaminated water. Nitrile option for use with oily water
  • Self-priming up to 3m vertical lift
  • Can handle moderate amounts of suspended solid matter
  • Packaged Dimensions: L:34.00 x H:26.00 x W:27.00cm
  • Actual Weight: 8.82 Kg  (Approx. 9.82 Kg packed)

51200-2011

1 1/2" bronze pump, 200-size, foot mounted with BSP threaded ports
Manual clutch with 1A / 1B pulley
  • Connections: - 1½" BSP internal threaded ports.
  • Dimensions: - 244mm long, 180mm pulley diameter
  • Output: - at 1500 rpm 195 litres/minute (43 gallons/min) at 3m total head
  • Heavy duty bilge and deck wash pump
  • Bronze body, stainless steel shaft, mechanical shaft seal
  • Neoprene impeller fitted as standard for maximum performance with clean or lightly contaminated water. Nitrile option for use with oily water
  • Self-priming up to 3m vertical lift
  • Self-adjusting clutch
  • Packaged Dimensions: L:34.00 x H:26.00 x W:28.00cm
  • Actual Weight: 8.90 Kg  (Approx. 9.90 Kg packed)

82605-0092

HotShot Wash Down heavy duty pressure controlled diaphragm pump
12 volt d.c., supplied with inlet strainer, trigger nozzle & port fittings
  • Connections: - for 19 mm (3/4") bore hose
  • Dimensions: - 270mm long, 111mm wide, 111mm high
  • Fuse Size: - 20 amp
  • Max Pressure: - 4.8bar (70psi)
  • Output: - 22.7 litres/minute (5 gallons/minute)
  • Weight: - 4(kgs)
  • New 5 chamber design
  • Diaphragm design allows dry running
  • High Pressure/High Capacity
  • Water resistant. Suitable for use with Seawater
  • Self-priming up to 3m vertical lift
  • Packaged Dimensions: L:30.00 x H:18.00 x W:20.00cm
  • Actual Weight: 7.06 Kg  (Approx. 8.06 Kg packed)

18590-2092

Macerator pump (12 volt d.c.)
  • Connections: - for 38mm (1½") bore inlet hose, 25mm (1") bore discharge hose
  • Dimensions: - 290mm long, 120mm wide, 95mm high
  • Fuse Size: - 20 amp
  • Output: - up to 43 litres/minute (9 gallons/minute) at 3m total head. Maximum recommended total head 6m
  • Compact toilet waste macerator pump
  • 15 minute rated, for use with waste holding tanks up to 900 litres (200 gallons) capacity
  • Grinds raw toilet waste to a uniform slurry for easy transfer and discharge
  • Self-priming up to 0.6m vertical lift
  • Fully sealed motor with Dry-Run protection device
  • Heavy duty 4 blade chopper
  • Packaged Dimensions: L:30.00 x H:9.00 x W:13.00cm
  • Actual Weight: 2.19 Kg  (Approx. 2.69 Kg packed)

29270-0000

Amazon' Universal pump
Connections for 38mm (1 1/2") bore hose
  • Connections: – for 38 mm (1½ ") bore hose
  • Dimensions: – 240mm long, 210mm wide, 150mm high, with 260mm handle (nominal dimensions for variable pump configuration)
  • Output: – up to 100 litres/minute (22 gallons/minute)
  • Flow direction reversible by exchanging inlet and outlet ports
  • Quick-release clamp ring for rapid disassembly
  • Optional through-deck kit permits operation from inside or outside cabin
  • Push-fit inlet and outlet elbows (1 supplied with pump) increase flexibility of installation
  • Stainless steel handle with bulkhead clips
  • Self-priming up to 4m
  • Packaged Dimensions: L:24.00 x H:16.00 x W:24.00cm
  • Actual Weight: 1.36 Kg  (Approx. 1.86 Kg packed)

29280-0000

Amazon' Warrior pump
Connections for 38mm (1 1/2") bore hose
  • Connections: - for 38mm (1½") bore hose
  • Dimensions: - 365mm long, 200mm wide, 260mm high, with 450mm handle
  • Output: - up to 135 litres/minute (30 gallons/minute)
  • Double diaphragm design for maximum efficiency and added safety: each side of the pump can work independently
  • Stainless steel handle with bulkhead clips
  • Self-priming up to 6m. Delivery head up to 6m.
  • Mounts on deck, or through deck (optional kit & bracket)
  • Packaged Dimensions: L:39.00 x H:31.00 x W:22.00cm
  • Actual Weight: 4.82 Kg  (Approx. 5.32 Kg packed)

Bilge Pump Accessories(29140-0000)

Bilge Master' switch panel
  • Dimensions: DIMENSIONS - 100mm wide, 60mm high,30mm deep (behind front panel)
  • Master control panel with 3-way switch and fuse holder
  • For automatically controlled d.c. electric pumps or electric clutch pumps
  • Water resistant switch can be mounted in exposed positions
  • Amber light indicates automatic mode set
  • Red light indicates pump running
  • Packaged Dimensions: L:16.00 x H:11.00 x W:11.00cm
  • Actual Weight: 0.21 Kg  (Approx. 0.41 Kg packed)

Bronze Engine Driven Clutch Pumps(50080-2001)

1" bronze pump, 80-size, foot mounted with BSP threaded ports
12 volt d.c. electric clutch with 2A pulley
  • Connections: - 1" BSP internal threaded ports.
  • Dimensions: - 160mm long, 180mm pulley diameter
  • Fuse Size: - 5 amp
  • Output: - at 1500 rpm 80 litres/minute (17.5 galls/min) at 3m total head
  • Bilge and deck wash pump
  • Bronze body, stainless steel shaft
  • Neoprene impeller fitted as standard for maximum performance with clean or lightly contaminated water. Nitrile option for use with oily water
  • Self-priming up to 2m vertical lift
  • Can handle moderate amounts of suspended solid matter
  • Packaged Dimensions: L:33.00 x H:20.00 x W:22.00cm
  • Actual Weight: 6.34 Kg  (Approx. 7.34 Kg packed)

Manually Operated Pumps(29240-0000)

Amazon' Bulkhead pump
Connections for 25mm (1") bore hose
  • Connections: – for 25mm (1") bore hose
  • Dimensions: – 250mm long, 170mm wide, 120mm high, with 260mm handle (nominal dimensions for variable pump configuration)
  • Output: – up to 45 litres/minute (10 gallons/minute)
  • For surface mounting on bulkhead or deck.
  • Light compact pump.
  • Ports and body can be positioned in 96 different ways for maximum flexibility of installation.
  • Stainless steel handle with bulkhead clips.
  • Self-priming up to 4m.
  • Packaged Dimensions: L:23.00 x H:16.00 x W:21.00cm
  • Actual Weight: 0.96 Kg  (Approx. 1.26 Kg packed)
Toilets

Manual Toilets(29090-3000)

Manual 'Twist n' Lock' toilet, compact bowl
  • Connections: - for 19mm (¾") bore inlet hose, 38mm (1½") bore discharge hose
  • Dimensions: - 450mm wide, 410mm deep, 340mm high (compare with regular size bowl model)
  • White vitreous china bowl, enameled wooden seat and cover
  • Reversible pump mounting for left or right-handed installation
  • Crevice-free contours and smooth moldings for added hygiene
  • Multi-angled discharge elbow for ease of installation
  • Corrosion-resistant materials for fresh or salt water service
  • All fastenings face front or top for ease of maintenance
  • Packaged Dimensions: L:54.00 x H:50.00 x W:54.00cm
  • Actual Weight: 10.80 Kg  (Approx. 11.80 Kg packed)
rolex replica watches nations will be "little prince" elements into this watch, we can see replica watches uk its "Little Prince" series of attention and love.Watch performance is still familiar with the replica watches uk large country pilot, equipped with IWC homemade CAL.51111 movement

Conversion Kits(29200-0120)

ELECTRIC CONVERSION 12 volt dc
  • Connections: - for 19mm (¾") bore inlet hose. Uses existing discharge elbow and outlet hose on manual pump
  • Dimensions: - 270mm high, 87mm wide, 150mm deep
  • Fuse Size: - 25 amp
  • Fits standard and regular bowl, left and right-handed installations
  • Simple rotary control for 'flush & discharge' or 'discharge only'
  • Self-priming pumps permit installation above or below waterline
  • Manual pump easy to refit if power supply fails
  • Noise - This unit runs with a characteristic 'buzz'
  • Packaged Dimensions: L:32.00 x H:17.00 x W:25.00cm
  • Actual Weight: 3.66 Kg  (Approx. 4.16 Kg packed)

Electric Toilets(37010-0090)

TOILET 12V - COMPACT BOWL
  • Fuse Size: - 25 amp
  • Maximum Current: - 16(amps)
  • Packaged Dimensions: L:54.00 x H:54.00 x W:50.00cm
  • Actual Weight: 14.50 Kg  (Approx. 15.50 Kg packed)

DELUXE FLUSH ELECTRIC TOILET Fresh water flush models, 12 volt dc (58020-1012)

Angled back for easy mounting against a sloping surface.
  • Connections: - for 19mm ( ¾”) bore inlet hose, 38mm (1½“) bore discharge hose
  • Dimensions: – 445mm high, 375mm wide, 450mm long Fuse Size: - 25 amp
  • Elegant bowl styling conceals all plumbing and wiring.
  • Quiet-flush cycle – like a household toilet. Water usage as low as 1 litre per flush
  • White vitreous china bowl
  • Use any remote-mounted automatic pressurised water pump for flushing.
    Pump must deliver at least 11 litres/minute.
  • Includes solenoid valve to control flushing pump & siphon breaker assembly.
  • Owner selectable choice of leaving bowl wet or dry after use.
  • Regular household size seat.
  • Uses less than 1 amp/hr per day
  • Packaged Dimensions: L:58.00 x H:63.00 x W:50.00cm
  • Actual Weight: 27.00 Kg (Approx. 29.00 Kg packed)

DELUXE FLUSH ELECTRIC TOILET Fresh water flush models, 12 volt dc(58040-1012)

Vertical back for snug fitting against a vertical bulkhead.
  • Connections: - for 19mm ( ¾”) bore inlet hose, 38mm (1½“) bore discharge hose
  • Dimensions: – 445mm high, 375mm wide, 450mm long
  • Fuse Size: 25 amp
  • Elegant bowl styling conceals all plumbing and wiring.
  • Quiet-flush cycle – like a household toilet. Water usage as low as 1 litre per flush
  • White vitreous china bowl
  • Use any remote-mounted automatic pressurised water pump for flushing.
    Pump must deliver at least 11 litres/minute.
  • Includes solenoid valve to control flushing pump & siphon breaker assembly.
  • Owner selectable choice of leaving bowl wet or dry after use.
  • Regular household size seat.
  • Uses less than 1 amp/hr per day
  • Packaged Dimensions: L:58.00 x H:63.00 x W:50.00cm
  • Actual Weight: 26.00 Kg (Approx. 28.00 Kg packed)

DELUXE FLUSH ELECTRIC TOILET Fresh water flush models, 24 volt dc(58040-1024)

Vertical back for snug fitting against a vertical bulkhead.
  • Connections: - for 19mm ( ¾”) bore inlet hose, 38mm (1½“) bore discharge hose
  • Dimensions: – 445mm high, 375mm wide, 450mm long Fuse Size: - 15 amp
  • Elegant bowl styling conceals all plumbing and wiring
  • Quiet-flush cycle – like a household toilet. Water usage as low as 1 litre per flush
  • White vitreous china bowl
  • Use any remote-mounted automatic pressurised water pump for flushing.
    Pump must deliver at least 11 litres/minute.
  • Includes solenoid valve to control flushing pump & siphon breaker assembly.
  • Owner selectable choice of leaving bowl wet or dry after use.
  • Regular household size seat.
  • Uses less than 1 amp/hr per day
  • Packaged Dimensions: L:58.00 x H:63.00 x W:50.00cm
  • Actual Weight: 28.00 Kg (Approx. 30.00 Kg packed)

29015-0000

19mm (3/4'') inlet vented loop
  • Connections: CONNECTIONS - for 19mm (¾") bore hose
  • Dimensions: DIMENSIONS - ¾"- 70mm high, 100mm wide, 25mm deep
  • Anti-siphon safety devices for all marine toilets installed below the vessel's static or heeled waterline
  • Simple valve system ensures that water cannot siphon over pipe loops
  • Moulded in tough plastic
  • For flush water inlet loop
  • Packaged Dimensions: L:6.00 x H:16.00 x W:24.00cm
  • Actual Weight: 0.03 Kg  (Approx. 0.23 Kg packed)

29135-1000

19mm Low Odour Hose (30m Coil)
  • Pipe material resists penetration by sewage.
  • White finish for smart appearance
  • Temperature range -20ºC to +100ºC
  • Packaged Dimensions: L:53.00 x H:17.00 x W:53.00cm
  • Actual Weight: 8.51 Kg  (Approx. 9.51 Kg packed)

29230-0000

25mm Radial Y-Type Diverter Valve
  • Connections: for 25mm (1") bore hose.
  • Dimensions: 80mm high, 140mm long (including handle)
  • Allows alternative routes for toilet discharge or toilet waste pump-out.
  • Manual lever action
  • Moulded one piece design
  • Corrosion-resistant polymer and stainless steel construction
  • Suitable, only for macerated waste.
  • Packaged Dimensions: L:16.00 x H:11.00 x W:11.00cm
  • Actual Weight: 0.25 Kg  (Approx. 0.45 Kg packed)

29135-1000

19mm Low Odour Hose (30m Coil)
  • Pipe material resists penetration by sewage.
  • White finish for smart appearance
  • Temperature range -20ºC to +100ºC
  • Packaged Dimensions: L:53.00 x H:17.00 x W:53.00cm
  • Actual Weight: 8.51 Kg  (Approx. 9.51 Kg packed)

29230-0000

25mm Radial Y-Type Diverter Valve
  • Connections: for 25mm (1") bore hose.
  • Dimensions: 80mm high, 140mm long (including handle)
  • Allows alternative routes for toilet discharge or toilet waste pump-out.
  • Manual lever action
  • Moulded one piece design
  • Corrosion-resistant polymer and stainless steel construction
  • Suitable, only for macerated waste.
  • Packaged Dimensions: L:16.00 x H:11.00 x W:11.00cm
  • Actual Weight: 0.25 Kg  (Approx. 0.45 Kg packed)

29289-0000

Under deck bracket (For 29280 Amazon Warrior)
  • Actual Weight: 0.55 Kg  (Approx. 0.80 Kg packed)
Lights

45900-0000

Deck flood light 150mm, 12 volt dc
  • Dimensions: - length 180mm, width 115mm
  • Fuse Size: - 6 amp
  • Compact floodlights for deck, cockpit or boarding point
  • Flat spread beam pattern for even illumination with sharp cut off
  • Corrosion-resistant materials
  • Stainless steel bracket for horizontal surface mounting
  • Packaged Dimensions: L:12.00 x H:18.50 x W:19.50cm
  • Actual Weight: 0.66 Kg  (Approx. 0.91 Kg packed)

45930-2012

Flush mount halogen floodlight, 157mm, 12 volt dc
  • Dimensions: - length 171mm, depth 84mm, high 108mm
  • Fuse Size: - 6 amp
  • Compact floodlight for deck, cockpit or boarding point
  • 45º × 20º flood beam pattern for even illumination with sharp cut off
  • U.V. resistant materials for non-yellowing
  • Heavy duty shock and vibration resistant construction
  • Weather proof 'full boot' seal protects wire contacts
  • Packaged Dimensions: L:17.00 x H:10.00 x W:8.00cm
  • Actual Weight: 0.80 Kg  (Approx. 1.10 Kg packed)

45960-0000

Flush mount flood light, trapezoidal beam, 12 volt dc
  • Dimensions: – 225mm long, 170mm high, 80mm deep
  • Fuse Size: - 5 amp
  • Unobtrusive flood lighting for deck, cockpit, and boarding point
  • Light angle adjustable up to 7º horizontally, 12º vertically
  • Halogen sealed-beam lamp
  • Two bulb types: flood for glare-free illumination below deck line; or flat spread for deck illumination
  • Packaged Dimensions: L:19.00 x H:14.00 x W:25.00cm
  • Actual Weight: 1.40 Kg  (Approx. 1.90 Kg packed)

60010-2012

Searchlight 255SL remote control 12 volt dc
  • Dimensions: - 280mm long, 270mm wide, 230mm high
  • Fuse Size: - 10 amp
  • Output: - 10 lux at 100m
  • Candlepower: - 200,000
  • Dual halogen sealed-beam lamps
  • Controlled from helm station
  • 360° horizontal sweep, 60° vertical sweep
  • Supplied with control panel and 7.5m of cable
  • Tough, weatherproof, corrosion-resistant construction
  • Optional secondary control panel and extension cable harness for dual helm stations.
  • Packaged Dimensions: L:46.00 x H:31.00 x W:47.50cm
  • Actual Weight: 9.64 Kg  (Approx. 10.64 Kg packed)

60020-0000

Searchlight 135SL remote control 12 volt dc
  • Dimensions: - 185mm long, 180mm wide, 210mm high
  • Fuse Size: - 10 amp
  • Output: - 7 lux at 100m.
  • Bulb Power: - 50(W)
  • Candlepower: - 100,000
  • Sealed-beam halogen lamp
  • Controlled from helm station
  • 320° horizontal sweep, 75° vertical beam spread
  • Supplied with control panel and 4.5m of cable
  • Tough, weatherproof, corrosion-resistant construction
  • Packaged Dimensions: L:26.00 x H:20.50 x W:31.00cm
  • Actual Weight: 2.22 Kg  (Approx. 2.72 Kg packed)

60080-0012

Searchlight 146SL remote control 12 volt dc
  • Dimensions: - 260mm long, 230mm wide, 240mm high
  • Fuse Size: - 10 amp
  • Output: - 15 lux at 100m.
  • Bulb Power: - 50(W)
  • Candlepower: - 175,000
  • Sealed-beam halogen lamp
  • Controlled from helm station
  • 360° horizontal sweep,
  • Supplied with control panel and 4.5m of cable
  • Tough, weatherproof, corrosion-resistant construction
  • Optional secondary control panel and extension cable harness for dual helm stations.
  • Packaged Dimensions: L:28.00 x H:29.00 x W:39.00cm
  • Actual Weight: 4.40 Kg  (Approx. 4.90 Kg packed)

60233-0012

Searchlight 233SL remote control 12 volt dc
  • Dimensions: - 240mm long, 240mm wide, 200mm high
  • Fuse Size: - 10 amp
  • Output: - 1 lux at 443m
  • Bulb Power: - (Per Bulb) 55(W)
  • Candlepower: - 200,000
  • Powerful dual beam halogen lamps
  • Variable focus mechanism delivers true Spot to Flood capability
  • Wireless searchlight control system allowing up to 4 easy-to install control stations
  • Infinite motion capabilities due to 8-way touch pad directional control
  • Continuous 360º rotation
  • 27º vertical movement
  • Sweep feature giving accurate and constant 10 degree sweep each side of starting position
  • Fast and Slow speed capabilities
  • Patent protected easy to install bayonet base with security locking mechanism
  • Packaged Dimensions: L:46.00 x H:31.00 x W:47.50cm
  • Actual Weight: 5.50 Kg  (Approx. 6.50 Kg packed)

61050-0012

Searchlight 155SL Remote control 12 volt dc
  • Dimensions: - 203mm long, 162mm wide, 200mm high
  • Fuse Size: - 10 amp
  • Output: - 7 lux at 100m.
  • Sealed-beam halogen lamp
  • Controlled from helm station
  • 320° horizontal sweep, 75° vertical beam spread
  • Supplied with control panel and 4.5m of cable
  • Tough, weatherproof, corrosion-resistant construction
  • Packaged Dimensions: L:33.00 x H:26.00 x W:24.00cm
  • Actual Weight: 2.74 Kg  (Approx. 3.24 Kg packed)
Blowers

34739-0010

75mm (3") flangemount blower, 4.2cu.m/min, 12 volt dc
  • Connections: – for 75mm (3") ducting
  • Dimensions: - 200mm long, 200mm high, 170mm wide
  • Fuse Size: - 10 amp
  • Output: AIR FLOW - 4.2 cu.m/minute
  • High volume air intake or extraction blowers for engine room fuel compartment, galley or heads
  • Outlet flange mounts directly on bulkhead
  • Made in corrosion-resistant materials
  • Quiet running
  • Packaged Dimensions: L:17.00 x H:14.00 x W:16.00cm
  • Actual Weight: 2.03 Kg  (Approx. 2.53 Kg packed)

35115-0020

75mm (3") flangemount blower, 3cu.m/min, 12 volt dc
  • Connections: – for 75mm (3") ducting
  • Dimensions: - 170mm long, 140mm high, 120mm wide
  • Fuse Size: - 6 amp
  • Output: AIR FLOW - 3 cu.m/minute
  • High volume air intake or extraction blowers for engine room fuel compartment, galley or heads
  • Outlet flange mounts directly on bulkhead
  • Made in corrosion-resistant materials
  • Quiet running
  • Packaged Dimensions: L:22.00 x H:17.00 x W:19.00cm
  • Actual Weight: 1.24 Kg  (Approx. 1.74 Kg packed)

35515-0010

75mm (3") flexmount blower, 3cu.m/min, 12 volt dc
  • Connections: – for 75mm (3") ducting
  • Dimensions: - 170mm long, 140mm high, 130mm wide
  • Fuse Size: - 6 amp
  • Output: AIR FLOW - 3 cu.m/minute
  • High volume air intake or extraction blowers for engine room fuel compartment, galley or heads
  • Outlet flange mounts directly on bulkhead
  • Made in corrosion-resistant materials
  • Quiet running
  • Packaged Dimensions: L:22.00 x H:17.00 x W:19.00cm
  • Actual Weight: 1.34 Kg  (Approx. 1.84 Kg packed)

35400-0000

100mm (4") flangemount blower, 7.1cu.m/min, 12 volt dc
  • Connections: – for 100mm (4") ducting
  • Dimensions: - 220mm long, 230mm high, 220mm wide
  • Fuse Size: - 15 amp
  • Maximum Current: - 12(amps)
  • Output: AIR FLOW- 7 cu.m/minute (250 cu.ft/minute)
  • High volume air intake or extraction blowers for engine room fuel compartment, galley or heads
  • Outlet flange mounts directly on bulkhead
  • Made in corrosion-resistant materials
  • Quiet running
  • Packaged Dimensions: L:30.00 x H:21.00 x W:27.00cm
  • Actual Weight: 2.56 Kg  (Approx. 3.06 Kg packed)

35760-0092

Continuous duty 100mm (4") blower, flangemount 12 volt dc
  • Connections: – for 100mm (4") ducting
  • Dimensions: - 240mm long, 230mm high, 220mm wide
  • Fuse Size: - 15 amp
  • Maximum Current: - 11(amps)
  • Output: AIR FLOW - 7 cu.m/minute (250 cu.ft/minute)
  • High volume intake or extraction blower for engine room duty on commercial vessels, charter yachts and other heavy-use installations
  • Outlet flange mounts directly on bulkhead
  • 5,000-hour motor life
  • Packaged Dimensions: L:28.00 x H:34.00 x W:29.00cm
  • Actual Weight: 2.95 Kg  (Approx. 3.45 Kg packed)

35770-0092

Continuous duty 100mm (4") blower, flexmount 12 volt dc
  • Connections: – for 100mm (4") ducting
  • Dimensions: - 230mm long, 250mm high, 240mm wide
  • Fuse Size: - 15 amp
  • Maximum Current: - 11(amps)
  • Output: AIR FLOW - 7 cu.m/minute (250 cu.ft/minute)
  • High volume intake or extraction blower for engine room duty on commercial vessels, charter yachts and other heavy-use installations
  • Flexible mounting permits 360º adjustment of outlet direction
  • 5,000-hour motor life
  • Packaged Dimensions: L:28.00 x H:34.00 x W:29.00cm
  • Actual Weight: 3.20 Kg  (Approx. 3.70 Kg packed)

36740-0000

75mm (3") flexmount blower, 4.2cu.m/min, 12 volt dc
  • Connections: – for 75mm (3") ducting
  • Dimensions: - 200mm long, 230mm high, 220mm wide
  • Fuse Size: - 10 amp
  • Maximum Current: - 6.8(amps)
  • Output: AIR FLOW - 4.2 cu.m/minute
  • High volume air intake or extraction blowers for engine room fuel compartment, galley or heads
  • Outlet flange mounts directly on bulkhead
  • Made in corrosion-resistant materials
  • Quiet running
  • Packaged Dimensions: L:22.00 x H:17.00 x W:19.00cm
  • Actual Weight: 2.32 Kg  (Approx. 2.82 Kg packed)

We Deal With